top of page

ReManufactured Compressors

ReManufactured compressors listed on this site are rebuilt to manufacturer's specs by an extremely experianced compressor engineer. They are totally disassembled and get new bearings, seals, gaskets, rings, valves, 4th stage piston and sleeve and any other parts required to bring it back to factory specs. The frames are cleaned and painted. The Auto Condensate Drain is refurbished. The electrical controls and filtration are inspected and serviced. The gauges and safety valves are inspected and replaced if required.

These units come with a One Year Warranty or 600 hours, which ever comes first. All work to be performed at the re-manufacturer’s location in Ocala Florida or subject to service charges.

Bauer K20 Horizontal

22 cfm - twin tower filtration

20 HP 3 phase 60 Hz Motor 

IMG_0001.JPG

ReManufactured  with new bearings, rings, seals, gaskets, valves, and 4th stage piston and sleeve. Auto Condensate Drain has been serviced and the motor serviced with new bearings.

This compressor will produce 22 cfm of Grade E air (18 tanks per hour)

$18,500

IMG_0003.JPG

Bauer twin 27" tower system removes moisture, oil vapor, carbon dioxide, carbon monoxide, and particulates. Will need to be changed after 560 tank fills at 95 degrees inlet temperature. Uses Bauer

58825 (X22677) and

58821 (X22247) filter cartridges

K20 end.jpg

The frame was sand blasted and painted. 

All components have been inspected and replaced if needed

The above unit comes with a One Year Warranty or 600 hours which ever comes first. All work to be performed at the re-manufacturer’s location in Ocala Florida or subject to service charges.

K15 Block.jpg

ReManufactured  with new bearings, rings, seals, gaskets, valves, and 4th stage piston and sleeve. Auto Condensate Drain has been serviced.

Output of this K15 is 12 cfm or 10 cylinders an hour

$12,000

K15 E1 K14 Control.jpg

Twin 27" tower system removes moisture, oil vapor, carbon dioxide, carbon monoxide, and particulates. Will need to be changed after 560 tank fills at 95 degrees inlet temperature. Uses Mako style filters

1803 (X65677) and

1801 (X65247) filter cartridges

K15 E! end.jpg

All components have been inspected and replaced if needed

The 10 HP Single Phase motor will be sent out to a specialist for inspection and bearing replacement.

The above unit comes with a One Year Warranty or 600 hours which ever comes first. All work to be performed at the re-manufacturer’s location in Ocala Florida or subject to service charges.

Heading 1

Bauer K15   Horizontal      1 year Warranty             220 volt Single Phase

bottom of page