top of page

LW 400 G MC


Based on the successful MC series, the range was expanded to two gasoline-powered models.

The capacity of 400 l/min, 14 cfm was taken from the electric version. The compressor can be customized and comes with an oil pump.

The low fuel consumption, long maintenance intervals and low maintenance costs round off the advantage package of the machine.


This new compressor series is the perfect solution for mobile operations needing higher volumes in a small light compressor.

These compressors are designed for a long lifetime and continuous operations, the ideal machine for smaller stationary applications. Long maintenance intervals guarantee extremely low maintenance costs.

With a small and handy frame these compressors are highly predestined for mobile breathing air

  • 4 Stroke gasoline motor

  • Lightweight aluminum frame

  • Ergonomic handles

  • Hand start with pull start

  • Manual condensate drain

  • 2 x Filling hose c/w filling valve and pressure gauge

  • Pressure maintaining and non return valve

  • All pistons c/w steel piston rings

  • Oil- / Water separators after 2nd and 3rd stage

  • Safety valves after each stage

  • 3 x concentric suction/pressure valves

  • Filling pressure to your choice (200 or 300 bar)

  • Connections to your choice (DIN 200 bar or 300 bar, CGA 200 bar or 300 bar and INT)

  • Breathing air purification in accordance to EN 12021

  • $2050   Automatic condensate drain

  • $565     Automatic stop at final pressure

  • $650     Intermediate pressure gauges and oil gauge

  • $870    Cylinder head temperature monitoring with auto shut down

  • $2725   Puracon filter monitoring (Auto shut down also available)

  • Additional Options Available

  • Switch over device 200/300 bar

  • Additional high pressure outlet

LW 400 G MC


Type:Air cooled piston compressor

Capacity [l/min] / [Nm³/h] / [cfm]:400 / 24 / 14

Max. Pressure [bar]:350

RPM [1/min]:1700

No of cylinders / No of stages:3 / 3

Prime mover type: Vanguard - 4 stroke drive motor

Drive power [kW]:13.4

Cooling air requirement [m³/h]:4020

Lubrication type: Oil pump + Splash oil

Oil capacity [l] / Oil pressure [bar]:approx. 1.8 / 2.5 (± 0,5)

Operating temperature [°C]:+5°C to +45°C

Filter capacity [m³ at +20°C]:750 (at +20°C)

Dimensions W x D x H [mm]:1410 x 510 x 826

Weight [kg]:171

Noise level (measured at 1 m) [dB(A)]:95

bottom of page